Automobile Bulk Loading

Our company adopts automobile bulk loader for bulk material loading. The automobile bulk loader is developed by our company from the successful experience at home and abroad. It can load dry powder and granular materials into vehicles and ships, suitable for electric power, building materials, chemical industry, grain and other departments. The machine can be interlocked with feeding facilities under the material silo. After truck is fully loaded, feeding facilities will stop working. The loading and unloading process is automated with high efficiency and less dust pollution. It is an ideal equipment for truck or ship loading of bulk powdery or granular materials.
Automobile bulk loader is mainly used for truck or ship loading under dry dust collector, ash hopper or ash storage warehouse, slag storage warehouse in thermal power plant.

Chat Now

Get Inquiry

Send Email

Introduction

The equipment is composed of a frame, a winching device, a telescopic discharging device, a material level detection device, a dust removal system, etc. The winch device includes a motor, a reducer and a roller device. The telescopic discharging device includes a loader head, a double-layer telescopic sleeve and an outer telescopic hose. When working, the telescopic discharging device is driven by the winching device. The material level detection device can detect the full position of the material, and it is controlled jointly with the discharging system to send out the full material alarm signal and close the discharging valve, to achieve the purpose of automatic control of the loading process.

The design of automobile bulk loader includes two parts: mechanical equipment and electrical control.

INDUSTRY SOLUTION

View More +

Thermal Power Industry

Fly ash is produced with the combustion of pulverized coal in thermal power plant, which will pollute the environment if it is not treated properly. Recovery and utilization of fly ash can avoid environmental pollution and increase economic benefits. SRON provides customers with fly ash storage, transportation and separation systems, and professional solutions.

Short construction period and low investment

Cost stable and reliable operation

High degree of automation, simple system operation

Sand Aggregate Industry

The selection of sand aggregate production line is an important part of modern aggregate production. The production line consists of three systems: ore receiving hopper, crushing and screening, and finished product storage. SRON provides customers with professional sand aggregate station system solutions.

Large storage capacity

Durability and weather resistance

Efficient material handling

Powder Grinding Station

Power grinding station is an indispensable device in powder production line, which is used to grind limestone, slag, steel slag, fly ash and so on into fine powder. It is widely used in high-quality cement mixing, large volume concrete and commercial concrete mixing station, high performance concrete, marine engineering, wharf, reservoir, tunnel engineering and so on.

Compact layout, strong adaptability,

Short construction period, and low investment cost,

Realizing customer’s benefits to the maximum extent

Reference

We have built projects in more than 30 countries and regions, with more than 900 sets of steel silos and up to 3 million tons of materials storage capacities.

View More +

Indonesia 2x3,000T Cement Steel Silo Project for SIG

This is a cement transfer project, of which the owner is SIG, the largest cement producer in Indonesia.

Material: Cement

Reserves: 2x3000 tons

Silo type: Spiral silo

CHN Energy Baotou Energy Coal Storage Yard Loading Station EPC General Contracting Project

This project is an EPC general contracting construction project, including fully enclosed silo loading tape machine, fully enclosed coal storage silo, and quantitative loading system, which has the functions of unattended automatic loading with background control and dust pollution free loading.

Storage Material: Coal

Silo Type: Welded Steel Silo

Project Information Coal Loading Station System

Ecuador Plastic Pellet Steel Silo Project

Square bolted steel silo is a unique silo with high land utilization rate. Under the same area, square silo has 25% more capacity than round silo. It is especially suitable for the old factory expansion or reconstruction projects.

Material: Plastic particle

Silo volume: 190 m³

Quantity: 11 sets

WHY SRON SILO

Our vision is to be international respected brand in the field of bulk materials storage and transportation field; Technology builds the beauty of project is our product and service principles; High-standard, globalized and to be an internationalized brand are our business philosophy.

ABOUT SRON

HENAN SRON SILO ENGINEERING Co., Ltd. is China leading reputable EPC Contractor for bulk materials storage silo project, closed storage yard, and bulk material port handling project for cement, clinker, fly ash, coal, slag powder, sand and gravel aggregate, grain, etc.

SRON TECHNOLOGY

SRON focuses on scientific and technological research, currently we have 100+ patented technologies, among which 10 are invention patents. SRON has a team of experienced technical engineers which can design the silo solution according to the project details.

SRON PROJECT EXPERIENCE

We have built projects in more than 40 countries and regions, with more than 900 sets of steel silos and over 3 million tons of materials storage capacities, SRON quality and reputation are highly recognized by global users.

SRON MISSION

To serve global customers in the field of bulk materials storage and transportation, with safe, reliable and professional EPC solution that represents China's top level capacity on engineering design, equipment manufacturing and project management standards.

ISO, SGS, RHEINLAND CERTIFICATION; 100+ Technical patents including invention patents.

More Related Certificates +