Horizontal Mixer

Introduction

The efficient continuous mixer can change the speed and direction of materials under the action of external force to ensure the uniform distribution of each component particle. Horizontal mixer is applicable to mixing dry plaster, cement, binder, filling materials, refractory materials, gypsum products, insulating materials, building chemicals, feed and fillers. At the same time, it achieves the optimal efficiency. The discharge port crosses the whole length of the mixing chamber, so it ensures that materials can be discharged out without residue in the shortest time.
Basic Structure
Continuous mixer consists of main body, driving device, and mixing knife.

Advantage

Efficiency

High efficiency, low noise, high mixing uniformity, stable operation and high reliability.

Driving Device

22 kW－200 kW

Capacity

75－450m³/h (According to the configuration and component structure of mixer)

Residual Material

< 0.1%

Efficiency

The discharging time of the equipment is shorter because it is single door discharging

Durable

The equipment is durable because of its specially designed mixing tools.

Longer Lasting

Small wear and less maintenance.

INDUSTRY SOLUTION

View More +

Aluminum Industry

In the field of aluminum industry, SRON provides customers with: alumina storage steel silo, silo roof homogenization system, silo bottom gasification discharge system, air chute conveying system, ultra-dense phase conveying system of electrolytic aluminum plant, etc.

High Abrasion Of Alumina

Low Investment And Operation Cost

Low Alumina Breakage Rate, And Smooth Discharge Without Plugging

Coal Mine

In the process of coal production, the traditional open-air storage of coal, loading of artificial loader are gradually phased out due to serious pollution and low efficiency. SRON provides customers with large coal storage silo, rapid loading system, rapid and quantitative loading system, long distance belt conveyor, and other solutions.

Stable steel grid structure

Low cost

Large coal storage capacity

Powder Grinding Station

Power grinding station is an indispensable device in powder production line, which is used to grind limestone, slag, steel slag, fly ash and so on into fine powder. It is widely used in high-quality cement mixing, large volume concrete and commercial concrete mixing station, high performance concrete, marine engineering, wharf, reservoir, tunnel engineering and so on.

Compact layout, strong adaptability,

Short construction period, and low investment cost,

Realizing customer’s benefits to the maximum extent

Reference

We have built projects in more than 30 countries and regions, with more than 900 sets of steel silos and up to 3 million tons of materials storage capacities.

View More +

Mongolia 2x7000T Cement Silo Project

This project is a cement silo system project. In order to ensure that the structural safety design of the project meets the extremely cold climate conditions of the project location (minus 40 degrees Celsius in winter), the company selected low-temperature resistant materials and adopted measures such as equipment auxiliary heating to ensure the smooth implementation of the project.

Storage Material: Cement

Silo Type: Spiral steel silos

Reserves: 2x7000tons

Malaysia 3x5000T Wood Pellet Silo Project

During the project design phase, the company fully considered the storage characteristics of wood pellets, strictly monitored and managed the temperature and humidity in the warehouse, and achieved real-time monitoring. At the same time, combined with the project characteristics and the needs of the owner, high-yield in-and-out warehouse equipment was equipped to solve the problems of broken and blocked materials that may occur during centralized material incoming, feeding and long-distance transportation.

Storage Material: Wood Pellets

Silo Type: Spiral steel silos

Reserves: 3x5000tons

6x10,000T Welded Clinker Silo System for San Miguel Corporation

This project is San Miguel Corporation, Davao, the Philippines 10x10000 tons steel silos system contracted by SRON. Among which, there are six clinker steel silos.

Material: Clinker

Reserves: 60,000 tons

Silo Type: Large welded steel silo

WHY SRON SILO

Our vision is to be international respected brand in the field of bulk materials storage and transportation field; Technology builds the beauty of project is our product and service principles; High-standard, globalized and to be an internationalized brand are our business philosophy.

ABOUT SRON

HENAN SRON SILO ENGINEERING Co., Ltd. is China leading reputable EPC Contractor for bulk materials storage silo project, closed storage yard, and bulk material port handling project for cement, clinker, fly ash, coal, slag powder, sand and gravel aggregate, grain, etc.

SRON TECHNOLOGY

SRON focuses on scientific and technological research, currently we have 100+ patented technologies, among which 10 are invention patents. SRON has a team of experienced technical engineers which can design the silo solution according to the project details.

SRON PROJECT EXPERIENCE

We have built projects in more than 40 countries and regions, with more than 900 sets of steel silos and over 3 million tons of materials storage capacities, SRON quality and reputation are highly recognized by global users.

SRON MISSION

To serve global customers in the field of bulk materials storage and transportation, with safe, reliable and professional EPC solution that represents China's top level capacity on engineering design, equipment manufacturing and project management standards.

ISO, SGS, RHEINLAND CERTIFICATION; 100+ Technical patents including invention patents.

More Related Certificates +