Belt Conveyors for Steel Silo System| SRON

Introduction

DTⅡ type fixed belt conveyor can be designed and calculated according to different terrain and working conditions and the requirements of conveying process, so as to be combined into a whole conveyor. It can be used to transport various bulk materials and finished goods with loose density of 500-2500kg /m³. Belt conveyor is mainly composed of frame, conveyor belt, roller, tensioning device, transmission device, etc.
The working environment temperature of belt conveyor is generally - 25 ~ 40 ℃. For belt conveyor working in special environment, if it is heat resistant, cold resistant, waterproof, anti-corrosive, and flame resistant, corresponding protective measures should be taken separately.

Advantages

Wide Scope of Application

Wide variety of conveying materials

Good Performance

Large conveying capacity

Strong Adaptability

Strong adaptability of conveying line

Flexible

Flexible loading and unloading

Long Service Life

Long service life & continuous working time

Very Safe

High security performance

Cost Effective

Low maintenance cost

Parameter

Belt width (mm)	belt speed（m/s）
	0.8	1.0	1.25	1.6	2.0	2.5	3.15	4.0	5.0	6.5
	conveying capacity（m³/h）
500	69	87	108	139	174	217
650	127	159	198	254	318	397
800	199	248	310	398	497	621	783
1000	324	405	507	649	811	1014	1278	1622
1200		594	742	951	1188	1485	1872	2377	2971
1400		825	1032	1321	1651	2064	2601	3303	4129
1600					2185	2732	3442	4371	5464
1800					2795	3493	4402	5590	6987	9083
2000					3467	4334	5461	6935	8668	11277
2200							6841	8687	10859	14120
2400							8286	10522	13152	17104

INDUSTRY SOLUTION

View More +

Concrete Mixing Station

Concrete mixing station is a building material manufacturing equipment composed of mixing host, material weighing system, material conveying system, storage system, control system and other ancillary facilities. It can make concrete which is put into construction and production as building materials, by mixing cement, sand, lime and other raw materials.

Convenient to install

Occupies a small area

Low construction cost

Loading Station

In the ore, coal, cement and other industries, transfer loading of bulk materials is completed in the mine, wharf or railway station. Loading station can realize rapid and quantitative loading.

High loading efficiency

Efficient and environmental

Low construction and operation cost

Coal Mine

In the process of coal production, the traditional open-air storage of coal, loading of artificial loader are gradually phased out due to serious pollution and low efficiency. SRON provides customers with large coal storage silo, rapid loading system, rapid and quantitative loading system, long distance belt conveyor, and other solutions.

Stable steel grid structure

Low cost

Large coal storage capacity

Reference

We have built projects in more than 30 countries and regions, with more than 900 sets of steel silos and up to 3 million tons of materials storage capacities.

View More +

Ecuador Plastic Pellet Steel Silo Project

Square bolted steel silo is a unique silo with high land utilization rate. Under the same area, square silo has 25% more capacity than round silo. It is especially suitable for the old factory expansion or reconstruction projects.

Material: Plastic particle

Silo volume: 190 m³

Quantity: 11 sets

Malaysia 3x5000T Wood Pellet Silo Project

During the project design phase, the company fully considered the storage characteristics of wood pellets, strictly monitored and managed the temperature and humidity in the warehouse, and achieved real-time monitoring. At the same time, combined with the project characteristics and the needs of the owner, high-yield in-and-out warehouse equipment was equipped to solve the problems of broken and blocked materials that may occur during centralized material incoming, feeding and long-distance transportation.

Storage Material: Wood Pellets

Silo Type: Spiral steel silos

Reserves: 3x5000tons

Pneumatic Conveying System

Pneumatic conveying is a common conveying method in industrial silo projects. The system layout is flexible, and it is especially suitable for the situation that has space limitation and is not conducive to the layout of conventional conveying equipment.

Material: Plastic particles

Conveying distance: Up to 160 m

Conveying form: Positive-pressure pneumatic conveying system

WHY SRON SILO

Our vision is to be international respected brand in the field of bulk materials storage and transportation field; Technology builds the beauty of project is our product and service principles; High-standard, globalized and to be an internationalized brand are our business philosophy.

ABOUT SRON

HENAN SRON SILO ENGINEERING Co., Ltd. is China leading reputable EPC Contractor for bulk materials storage silo project, closed storage yard, and bulk material port handling project for cement, clinker, fly ash, coal, slag powder, sand and gravel aggregate, grain, etc.

SRON TECHNOLOGY

SRON focuses on scientific and technological research, currently we have 80+ patented technologies, among which 8 are invention patents. SRON has a team of experienced technical engineers which can design the silo solution according to the project details.

SRON PROJECT EXPERIENCE

We have built projects in more than 30 countries and regions, with more than 900 sets of steel silos and up to 3 million tons of materials storage capacities, SRON quality and reputation are highly recognized by global users.

SRON MISSION

To serve global customers in the field of bulk materials storage and transportation, with safe, reliable and professional EPC solution that represents China's top level capacity on engineering design, equipment manufacturing and project management standards.

ISO, SGS, RHEINLAND CERTIFICATION; 100+ Technical patents including invention patents.

More Related Certificates +