Radio frequency admittance level meter

Radio Frequency Admittance Level Meter

Radio frequency admittance level meter is a new material level control technology which is anti material hanging, more reliable, more accurate and more broadly applicable. It can detect all materials and is unaffected by material density, particle size, chemical composition, deposition viscosity and conductive properties. It is widely used for the control of liquid, powder, slurry, solid and other materials.

Introduction

When the instrument works, the sensor of the instrument forms an admittance value with the silo wall and the measured medium. When material level changes, the admittance value changes accordingly. The circuit unit converts the measured admittance value into level signal output to realize material level measurement.

Advantage

Universality

It is applicable to various occasions, and it can detect particles, fly ash, conductive and non-conductive liquid,and viscous materials

Anti-Adhesion Circuit

Its advanced anti-adhesion circuit design can eliminate false error signals caused by material adhesion;

Power Loss Protection Mode

With low or high bit fault alarm, it is adjustable on site.

Easy to Use

Easy installation and adjustment

Free of Material Sticking and Hanging

It is free of material sticking and hanging

Stable

It has good stability and is unaffected by temperature

Adjustable

The delay output is adjustable

High Temperature Resistant Performance

The highest optional temperature resistance: 550℃

INDUSTRY SOLUTION

View More +

Chemical Plant

In chemical production, SRON’s wide application in the field of mixing, bag breaking and storage of plastic particles, plastic additives, and particles.

Good sealing

Low cost

Good corrosion resistance

Sand Aggregate Industry

The selection of sand aggregate production line is an important part of modern aggregate production. The production line consists of three systems: ore receiving hopper, crushing and screening, and finished product storage. SRON provides customers with professional sand aggregate station system solutions.

Large storage capacity

Durability and weather resistance

Efficient material handling

Powder Grinding Station

Power grinding station is an indispensable device in powder production line, which is used to grind limestone, slag, steel slag, fly ash and so on into fine powder. It is widely used in high-quality cement mixing, large volume concrete and commercial concrete mixing station, high performance concrete, marine engineering, wharf, reservoir, tunnel engineering and so on.

Compact layout, strong adaptability,

Short construction period, and low investment cost,

Realizing customer’s benefits to the maximum extent

Reference

We have built projects in more than 30 countries and regions, with more than 900 sets of steel silos and up to 3 million tons of materials storage capacities.

View More +

Indonesia 6,000T Cement Steel Silo Project for SIG

This is a cement transfer project, of which the owner is SIG, the largest cement producer in Indonesia.

Material: Cement

Reserves: 6000 tons

Silo type: Spiral silo

6x10,000T Welded Clinker Silo System for San Miguel Corporation

This project is San Miguel Corporation, Davao, the Philippines 10x10000 tons steel silos system contracted by SRON. Among which, there are six clinker steel silos.

Material: Clinker

Reserves: 60,000 tons

Silo Type: Large welded steel silo

South Korea Slag Cement Mixing System for POSCO

This is a POSCO Group slag cement mixing project contracted by SRON. This project is an overseas EPC general contracting project. The design, supply and construction of the project are all completed by our company.

Materials: Slag powder, cement

Reserves: Slag (1000 tons)/cement (3000 tons)

Silo type: Spiral silo, Bolted silo

WHY SRON SILO

Our vision is to be international respected brand in the field of bulk materials storage and transportation field; Technology builds the beauty of project is our product and service principles; High-standard, globalized and to be an internationalized brand are our business philosophy.

ABOUT SRON

HENAN SRON SILO ENGINEERING Co., Ltd. is China leading reputable EPC Contractor for bulk materials storage silo project, closed storage yard, and bulk material port handling project for cement, clinker, fly ash, coal, slag powder, sand and gravel aggregate, grain, etc.

SRON TECHNOLOGY

SRON focuses on scientific and technological research, currently we have 80+ patented technologies, among which 8 are invention patents. SRON has a team of experienced technical engineers which can design the silo solution according to the project details.

SRON PROJECT EXPERIENCE

We have built projects in more than 30 countries and regions, with more than 900 sets of steel silos and up to 3 million tons of materials storage capacities, SRON quality and reputation are highly recognized by global users.

SRON MISSION

To serve global customers in the field of bulk materials storage and transportation, with safe, reliable and professional EPC solution that represents China's top level capacity on engineering design, equipment manufacturing and project management standards.

ISO, SGS, RHEINLAND CERTIFICATION; 80+ Technical patents including invention patents.

More Related Certificates +